Newest JennyPrinter3 Z360 Dual Extruder Nozzle Auto Leveling 3D Printer DIY KIT For Ultimaker 2 UM2 Extended Include All Parts

$996.55

Buy product

SKU: 32616429426

Description

 

 JennyPrinter3 Z360 is Extended for Ultimaker2, Even higher than Ultimaker2 Extended. 

 

Newest Z360 is upgrade with the Ultimaker2+ Olsson Block, So you can change different size of nozzles by yourself.
In the KIT, we will provide many sizes nozzle : 0.25mm, 0.4mm, 0.6 mm and 0.8 mm.
And also free provide:Two roll filament(PLA or ABS), Tools and 8 GB SD Card(We have store the assembly manual, operation manual and firmware in the SD card).
Note:
1.This is JennyPrinter3 Z360 dual nozzles full DIY KIT not assembled,It need to assemble by yourself.
2.This picture is JennyPrinter3 Z360 single nozzle. When you buy this product for dual nozzle, we will replace the dual nozzle hotend kit.And add 1 extruder and filament for you.
Ultimaker2+ Dual Nozzle Header

 

 

341567

Printing Process

 

P.S:

All JennyPrinter have two types of nozzles: 1.75mm and 3.0mm. In our test, we found that the effect of 1.75mm was better than 3.0mm. So we will give you 1.75mm nozzle. If you want 3.0mm nozzle, please give us a message.

1.75

About Shipping

1. In general, We will ship to you 1-3days after made payment. But we need ship it to transfer station first and it takes 2-3 days. So it will takes total 4-7 days for provide you with the tracing.

2.The DIY KIT will be sent by express,Use FedEx or DHL.it will takes 5-10 business days to deliver. If your address are a remote areas, you need to pay extra fees.

3.Customs duties or taxes are buyer's responsibility for all of the listings. Please check with your local customs office if you have any doubts. If you have any special request about Customs Declaration value pls contact with us.

4.Please confirm you are putting a correct and complete shipping address here. You are responsible for extra charge if your package has been returned because of wrong address.

About Our Services

We provide technical support for you, if you have any problems, pls contact us for help.

About Feedback

1.If you are satisfied with the 3D Printer DIY KIT, please give a positive feedback to us, Thank you very much.

2.If you are not satisfied for any reasons, please contact us before give a negative feedback, we will together work with you to help you solve the problem until you are satisfied.